What you need:

Pencil | Level | Power Drill | Hammer | Screw Driver

2 x Wall Plugs (included & optional) | 2 x Screws (included) |

Find the perfect home for Martha. Make sure you can open the door without obstruction. Ideally, Martha should be installed on the wall above an outdoor garden tap.

Hold Martha on the wall where you would like to install her and open the front door. Use a level to make sure she’s straight. Mark the 2 holes at the back with a pencil.

Temporarily remove Martha and then drill the 2 marked holes. The holes should be 120mm apart.

If installing in brick, plaster or stone - insert 1 wall plug into each hole by gently tapping it in with a hammer. If installing in timber there is no need for the plugs.

Return Martha to the wall and line-up the holes you drilled with the 2 holes at the back of Martha. Screw in the 2 screws.

Once Martha is firmly in place, wind your hose around the outside and store your garden tools on the inside. Or if you have a Fritz Tango expandable hose you can scrunch it up and store it inside also.

Sit back, grab a drink and admire your handywork! And don’t forget to let us know if you had any issues with the installation process. Please reach out to hello@fritztango.com